Phone: (888) 844-3736     www.tigerfoam.ca  
   
   
       
       
  E-84 Fire Rated Formula!   Safe EZ to Use  
  >>> Change GREEN Boxes Only <<<  
  Calculation Chart for Stud Wall Cavity - Open wall surface spray formula  
    Or Metal Building  
  Sq. Feet of wall:      
  (Length X Height) Ft. X  total running wall area  
  Sq. Feet of roof: X (if applicable  - Metal Buildings)  
  Less Windows and Doors   (Total Square Footage of Doors & Windows)  
     
  Number of Inches: (applied inches of expanded foam)    
       
  Buy Number of Kits:    TF600FR Kits     
     
  Enter Price per kit    
     
  Product Cost:   Estimates of Heating & Cooling costs below include  
    estimated price increases in gas and fuel this year.  
  Est. Heat/Cool Month   Heating and cooling costs calculated at  
  (non-foam) Your Neighbor   levels consistant with avg. insulated space  
    without foam   using non-foam insulations.    
     
  Est. Heat/Cool Month   Heating and cooling costs calculated at  
  (with foam) Your House   levels consistant with avg. insulated space  
    with Foam   using foam insualtions to seal & insulate.  
     
  Savings per month:   This is the amount that goes back in your  
        pocket each month.    
     
  Payback period:   Compared to 30% higher cost for foam than  
  (in months)   installed fiberglass only.    
     
  Note: this is a general estimation tool and works for square footage coverage in  
  excess of 600 square feet total, which will be most projects. Smaller projects  
  requiring less than 600 board feet should order smaller 200 bd. ft. kits.    
     
  Disclaimer: actual results may vary. This calculator is a guide and not a guarantee  
  of actual savings, though we believe it is representative of average results.