Tiger Foam - Spray Foam Frequently Asked Questions
Available in PDF format

1. How to calculate the amount of Spray Foam required for my project?

   Due to the variety of insulation application and different formulas of Tiger Foam Insulation/Air Sealant that are available, there is several formulas to calculate your spray foam needs. Visit our Spray Foam Calculation Page for full instructions. Also View Our - Online Surface Spray Foam Calculator
   
   If you have problems calculating, simply call our sales office directly at (888) 844-3736 and they'll be happy to do the calculations for you.

2. How many pounds does Tiger Foam float when used in flotation devices, marine applications or floating docks?

   Tiger Foam floats 60 pounds per cubic foot.

3. Is spraying Tiger Foam easy?

   Yes - spraying foam is easy for the DIY homeowner or contraction. Each first time order of Tiger Foam receives an instructional DVD with step-by-step instruction on how to handle and spray the product. Click here for 6 simple guidelines for using spray foam or explore our video library to see how its done.

4. How to apply 1" thickness of spray foam required for maximum coverage?

   When Spraying Tiger Foam, apply it like a thick paint surface which then will rise to 1 inch of cured foam. Applying Tiger Foam in layers is preferred than applying too much in one pass. This causes foam surface to sag and may drop if it's an overhead application. If your job requires more than one inch, apply the first layer then let it cure tack free before applying another layer of foam. The spray foam curing time is approximately 45 seconds. This procedure can be repeated till your required thickness is achieved. Remember Tiger Foam has approximately an R-7 per inch.

5. Do I have to use the whole kit all at once when first opened?

   On the Tiger Foam DVD it includes full shutdown instructions and advice on reusing spray foam nozzles. It's best to use your kit within a month after opening. Bottom line is that the material is good for 1 year in the tank, 5 days in the hose, and 30 seconds in the tip.

6. Is Tiger Foam a vapor barrier?

   Tiger Foam, like all 2lb polyurethane spray foams, will provide a vapour barrier once it has reached a resistance to moisture of 60 monograms. Tiger Foam has been tested by Canadian labs to ensure that this has been met at the 2-3 inch thickness.

7. What is the right temperature to spray in?

   The ideal temperature to spray foam is 10 degrees Celsius and higher. This can be done artificially with a work lamp or space heater too. Be cautious the surface doesn't get too hot or adhesion problems may occur as the foam slides right off the surface. However, the wall/board/pipe/etc doesn't need to be heated through, just the superficial surface the foam will bond to.
   
   The tanks also need to be between 23-27 degrees C for maximum performance. If you are artificially heating/cooling the tanks, keep in mind that since they are steel, the tanks will be in range before all the chemical is. If you are bringing a tank up to temperature, shake the tanks to make sure all the chemical is a uniform temperature then apply a blanket, sleeping bag to ensure you heat is kept in while you spray. Ambient temperatures can deplete the heat from the liquids. Your temperature can be obtained by shooting an infra thermometer to observe for spraying purposes.

8. Do I need a new gun with each kit?

   Yes, although in a emergency you could borrow a spray gun from a previously used kit. This tends to be a little risky especially if the gun and hose had not been cleaned out properly. Tiger Foam chemicals are the costly part of the kit. Robbing Peter to pay Paul never works. If you have lost or damaged your spray gun or hose, you can purchase a replacement now online.

9. Is Tiger Foam environmentally friendly?

   Tiger Foam Products are fully compliant with applicable Safety and Environmental regulations for: volatile organic compounds, propellants, and safety. Click here to learn more about this eco-friendly spray foam.

   Just like table manners, it depends on the person whether spraying foam is messy. Be sure to use proper PPE including a respirator with proper cartages, hooded tyvek suit, goggles and gloves to protect your skin eyes and clothes. It's best to move anything you don't want foam on away from the spray foam job area. Use tarps, drop clothes, or tape off areas using 6 ml poly, ultimately treat it like a paint job and you will have no surprises.

Thank you for choosing Tiger Foam Products!